Do KONI shocks have lifetime warranty?

The KONI warranty is to the original purchaser against defects in materials or workmanship for as long as you own that car (registered for street use) during the applicable warranty period of two years. The warranty does not cover damage to the parts caused by misuse, misapplication, wrong installation, etc. via

How much does it cost to rebuild a KONI shock?

KONI shock rebuilds start at $200 each. via

Are KONI good shocks?

The KONI Special Active design is so revolutionary, it is licensed by many auto manufacturers worldwide. The Special Active shock absorbers are especially well-suited to modern cars equipped with Run-Flat tires, which typically make a car ride harshly. via

Which is better KONI or Bilstein? (video)

https://www.youtube.com/watch?v=Y8UZvxBDFFE

Where are KONI shocks made?

KONI was founded in 1857 in Oud-Beijerland, the Netherlands, by A. de Koning. The business did not start with making shock absorbers, but with making leather equipment for horses. via

Are KONI shocks gas or hydraulic?

KONI makes some shocks that are not gas shocks. Why? There are basically three types of shock absorber designs: mono-tube high pressure gas, twin-tube low pressure gas and twin tube hydraulic (non-gas). via

How do you rebuild KONI motorcycle shocks? (video)

https://www.youtube.com/watch?v=0_InEnom2ec

Are KONI yellows monotube?

Koni treats each suspension project on a case-by-case basis, meaning they make applications of both twin and monotube construction with or without gas. “We make a lot of non-gas shocks, but other big-name makers told everybody back in the '70s that gas shocks are better than non-gas shocks. via

Are all KONI shocks adjustable?

Almost all KONI externally adjustable dampers are quickly and easily adjusted by placing a KONI knob on the adjuster tab that sticks out of the top mounting threading. As shown on the knob, turn counter clockwise for firmer, clockwise for softer. via

How do KONI shocks work?

When the piston rod is pulled out, the oil between piston and guide is forced to flow through the piston. The resistance encountered in this manner generates the rebound damping. At the same time, part of the piston rod will emerge from the cylinder and the free (floating) piston will move upwards. via

How do I install Koni adjustable shocks? (video)

https://www.youtube.com/watch?v=A7De-zaf8oM

Are Bilstein B6 shocks good?

The equally comfortable and dynamic alternative, which does not require suspension lowering, is the BILSTEIN B6. This gas pressure shock absorber in standard length offers a decisive advantage in damping force, which makes itself felt not just in extreme situations. via

Can I use Bilstein B6 with lowering springs?

Their official response was that the B6 are designed to be paired with lowering springs as well as stock springs. Bilstein felt there was no need for a B8 shock for this plaftorm because the B6 was sufficient to them. From my overall experience on lowering springs - less is more. via

Who owns KONI shocks?

Part of the ITT family

Since 1972, KONI has been part of ITT (ITT: NYSE). ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the transportation, industrial, and energy markets. via

What is KONI brand?

KONI is the premier manufacturer of performance and adjustable shocks in the world. KONI shocks are made from the highest quality raw materials and machined to the tightest tolerances. KONI has taken shock absorber performance and comfort to the next level with patented Frequency Selective Damping) technology. via

What shocks are made in the USA?

Monroe is an American company that has been around since 1918 (the same year as KYB), making it one of the oldest automotive parts manufacturers in the United States. They primarily focus on producing shocks and struts for cars and trucks, and they manufacture both shocks and struts for motorcycles. via

What brand of shocks are white?

WP Suspension

via

Should shocks extend on their own?

Fully compress unit and allow the rod to extend on its own. This should require less than 45 seconds on a unit with normal gas pressure and up to 2 minutes for a low gas unit. If the unit fully extends to these specs, it is considered fully functional. Non-gas units do not extend. via

Does KONI make coilovers?

KONI shocks and KONI coilovers have taken performance and comfort to the next level. The patented KONI FSD shocks (Frequency Selective Damping) bring a new level of technology and comfort to driving. via

Can you recondition shock absorbers?

Generally, you would have two options to fix the problem of worn shocks: repair the broken part(s) or do a shock absorber reconditioning. Contrary to what many people think, shock absorbers can be fixed. It is usually cheaper than having to buy new ones, especially when you have to replace four of them at a go. via

How much does it cost to get new shocks?

Shock Replacement Cost

The average total cost to replace a pair of shocks will run about $250 to $580. An individual shock absorber will cost around $50 to $140 so parts alone will set you back between $100 and $280. A couple hours of labor to do the job is an additional $150 to $300. via

How do you check motorcycle shocks?

An easy way to check if your shock spring rate is in the ballpark is to measure the rear “free” sag, that is, the sag without your weight on the bike. This number should be between 0 and 5mm–with the bike off its stand and on its own, you should be able to lift the rear end just slightly and top out the suspension. via

Where are Bilstein shocks made?

BILSTEIN's main production facility North American production facility is located at our U.S. Headquarters in Hamilton, OH. At this location, we produce highly engineered semi-active and passive monotube shock absorbers for high-performance automobiles, motorsports and off-road vehicles. via

How do you adjust adjustable shocks? (video)

https://www.youtube.com/watch?v=wNlBfCGLaRc

Can you adjust struts? (video)

https://www.youtube.com/watch?v=1thZs7Pil1U

What is better gas shocks or oil shocks?

1 Answers: Generally, gas filled shock absorber are considered better and more advance than oil filled shock absorber, they allow better performance, comfort and driving safety. via

Why do we use oil in shock absorbers?

The shock absorbers dampen the movement of the springs by converting the spring's kinetic energy into thermal (heat) energy. This thermal energy is then degenerated in hydraulic fluid. Shock absorbers are an oil-filled cylinder. via

What are shock absorbers filled with?

As mentioned, shock absorbers are basically oil pumps. A piston is attached to the end of a piston rod and works against hydraulic fluid in the pressure tube. As the suspension travels up and down, the hydraulic fluid is forced through orifices (tiny holes) inside the piston. via

How do I install Koni Sport shocks? (video)

https://www.youtube.com/watch?v=BkRKKlKlJh8

How do you install adjustable rear shocks? (video)

https://www.youtube.com/watch?v=TC2rJextXEM

Is Bilstein better than Fox?

Bilstein 5100 has lifted vehicle support too, and they function well right until you get to the 4” mark. Above that, Fox is the king. 2.0 shocks will provide firmer control and better damping on higher lifted trucks. The fit is also snugglier if you decide to go big with 4.5” or 5”+ lifts on your offroad monster. via

Does Bilstein B6 raise height?

So a couple of people here, including myself, have noticed that the ride height increased a bit (generally about 1/4-1/2") after installing Bilstein B6/B8 dampers/struts. via

Who is KONI swimmer?

The film's lead Sriparna Banerjee was also a professional swimmer herself in the 1970s and at the time of casting a student of Jadavpur University. In a 2012 interview, veteran actor, Soumitra Chatterjee, called Koni one of the best films of his career.
...
Kony (film)

via