What's the most reliable carburetor?
Out of 13 brands of carburetors, enthusiasts elected Advanced Engine Design (AED), Edelbrock, and Holley (in alphabetical order) as the top 3 most reliable brands of carburetors. These three brands were only a few percentage points within each other, making it a very close race. via
What is a dirt bike smart carb?
WHAT IS THE SMARTCARB? The SmartCarb is a precision air-and fuel-metering instrument designed to push the limits of mechanical fuel atomization. A proprietary Venturi concentrates and accelerates airflow for better fuel atomization. via
What are the benefits of a lectron carb?
According to Lectron, the three main benefits to their carburetor are, 1) it is much easier to tune, 2) because of better atomization, it provides better fuel economy, and 3) it provides a much more linear power curve. via
Do bigger carburetors make more power?
A bigger carburetor has enough room for more horsepower and is usually equipped with bigger engines. This means a bigger carburetor gives you power at the high RPM range. Whereas a smaller carburetor gives you a more responsive throttle. via
Which carburetor should I use?
The formula for calculating how much CFM (cubic feet per minute) your engine requires is: CFM = Cubic Inches x RPM x Volumetric Efficiency ÷ 3456. Any ordinary stock engine will have a volumetric efficiency of about 80%. via
How do I choose a carburetor?
To arrive at the most appropriate carburetor choice, there's a basic formula: engine displacement multiplied by maximum rpm divided by 3,456. For example: a typical 355ci small-block—a 0.030-over rebuild—with a 6,000-rpm max engine speed would work well with a 616-cfm carb ((355 x 6,000) 3,456 = 616.32). via
What is Keihin carburetor?
Keihin carburetors are designed to be used with normal pump gasoline. Fuels that contain over 10% alcohol content may damage parts in the carburetors. This may prevent the carburetor from functioning properly. via
How does a Lectron carburetor work?
The Lectron carburetor uses divergence to create “Fuel-Lift”. The shape and contour of the ground surface of the metering rod controls how much fuel is allowed to be drawn up in response to the extremely strong fuel pick-up signal. via
Can you use a Lectron carb on a 4 stroke?
*Lectrons are a great choice for riders seeking performance, fuel economy, simplicity and smoother power delivery. *Most 4 stroke engines idle around 1,500 – 2,400 RPMs this is where 4 stroke Lectrons function best but no lower. via
Does Lectron carb add horsepower?
Lectron's dyno testing has shown a 20% increase in torque and horsepower at 5000RPM compared to the outgoing 38HV on a KTM 250. This is what riders refer to as “bottom end.” It is the meat of the powerband for off-road riding, and creates faster acceleration out of corners for all disciplines. via
Do Lectron carbs have jets?
Although the original Lectron® carburetor of 1974 did not have a power jet, all modern iterations of the design come with at least one or more power jets to provide additional fuel to the mix from mid to top. via
Are Lectron carbs fuel injected?
If you want the ease and consistency of a fuel injected 4 stroke but the feeling, weight, and agility of a 2 stroke, buy this carb and put it on your 2 stroke and be done with it! It's a great product and you won't be disappointed! Everything with a carburetor needs a Lectron. via
What makes more HP carb or fuel injection?
Warren Johnson: Properly tuned, carburetors make more peak power than EFI in a Pro Stock engine. A carb's pressure differential atomizes the gas a lot better than spraying fuel through an orifice. But EFI has a broader powerband and superior cylinder-to-cylinder fuel distribution. via
How can I make my carbureted engine faster? (video)
What happens if you put a bigger carburetor?
A bigger carburetor alone will not make your bike go faster. In most cases, your bike won't even start or idle roughly with a carburetor that's too big. For more power, you should look into a full system performance exhaust and rejetting your carb (not replacing it entirely). via
How much HP can a 750 carb support?
As an example, a 750-cfm carb on one of my street/strip Chevy 383 small-blocks can make more than 600 streetable hp, whereas an engine less well spec'd may only make 540 to 550. For what it is worth, it is possible to get the BSAC figure below 5 lbs/hp/hr. via
What does a 4 barrel carb do?
A four-barrel carburetor has two primary and two secondary barrels. At idle and low-rpm driving, only the primary barrels open. The throttle blades on the secondary barrels stay closed. As rpm increases, the engine requires more air and fuel to make power, and this is when the secondary barrels kick in. via
How do I know if my carburetor is too small?
If the carburetor is too small, it restricts airflow into the engine. The cylinder can't fill up all the way. This starves the engine and results in slow acceleration and a lack of top-end power. A larger displacement engine running at higher rpm will require more air and fuel. via
Can I use a different carburetor?
You'll have to ensure the draft is the same (side-draft carb replaced with a side-draft carb, etc). You could put a down draft carb in place of a side-draft, but it would necessitate some unwanted plumbing, pure ugliness at the carb location, as well as a probable loss of performance. via
Are there different size carburetors?
People try to size their carburetors based on power, but it really comes to down to cubic inches, rpm, and volumetric efficiency. via
How do I know what size carburetor I have?
It's like a "VIN" for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it. via
Are Keihin carbs good?
There are plenty of Mikuni and Keihin carburetors in the market are not authentic. They're not safe to use and will cause many problems to your bike. If you think you've made a purchase and you're not sure if it's a genuine carburetor, here are some tips that will help you to identify them. via
Does Honda own Keihin?
Currently, Honda owns 41 percent of Keihin, 34 percent of Showa, and 35 percent of Nissin Kogyo. Upon completion of the deal, Honda will hold a 33.4% stake, and Hitachi will own the remaining 66.6% stake. via
What does PWK carburetor mean?
Producing power without compromise. The motocross world knows PWK. Keihin PWK carburetors is the dominant carb on the factory motocross machines. Because of their great performance they come stock on a lot of the leading brand bikes. With these features you can take advantage of Keihin's superior performance. via
How do I tune my lectron? (video)
How do you know if a 2 stroke is running rich?
keeping the engine under a light load (you will only be opening the throttle to 1/2 or so) If the needle is set too rich you will hear a sputtering like the choke is on and the acceleration will be slow. If the clip position is too lean the engine will sound quiet and have a “dead” feeling possibly hesitating. via
What does a power jet do?
From three-quarters to full-throttle openings, the power jet primarily controls the fuel flow. via
Do you have to adjust a lectron carb?
The flat side must always be facing the motor to do this. Don't adjust it without running it first. It comes preset from the factory, and tuning it on the stand will not accurately represent conditions when the motor is operating under load at the track or on the trail. via
Where are lectron carbs made?
After all, winners choose Lectrons! Because quality, innovation, and design make these carburettors superior to any other carburettors available on the market. Nearly 46 years of winning and still made in the USA! via
What does the needle and seat do?
The first stop for the flow of fuel coming into a carburetor is the needle and seat. Essentially, this is a basic valve. The seat is typically conical and the needle has a point which seals against the seat to stop fuel from entering the carb at a certain level. This prevents flooding the engine and engine compartment. via
What carburetor is made in USA?
Every Edelbrock Carburetor is manufactured in the USA and has been specifically designed and tuned by Edelbrock engineers to provide the widest overall torque range. via
What size is a Lectron carb?
This is a stock 36mm carburetor. via
What is FCR carb?
Sudco Press Release: Keihin FCR Carburetors are acknowledged as the leading carburetors in 4-stroke motorcycle racing thanks to their precise metering high flow, flat slide throttle design and adjustable accelerator pump. via
Can you turbo a carbureted engine?
Turbos are a great way to increase power on fuel injected engines, but they can also be used with carbureted set-ups as well. With a carburetor you have a few options, you can install a specialized blow through carb on your intake along with a carb hat. via
What are two disadvantages to using a carburetor?
Disadvantages of carburettor :
More fuels are consumed since carburettors are heavier than fuel injectors. More air emissions than fuel injectors. Maintenance costs of the carburettor are higher than with fuel injection system. via
What are the disadvantages of fuel injection?
Disadvantages of a fuel injection system :
The fuel injection system is a lot more expensive than a carburettor upgrade. Repairing fuel injectors is not easy as compared with carburettors. The Air fuel ratio and mix of that will be excellent in a carburettor than a direct Injection system. via
How do I make my carburetor run richer?
Regardless of whether or not the engine is running too rich or too lean, bring it down to a very lean mixture by turning both screws a quarter-turn at a time, counter-clockwise, then slowly bringing them back up to an equal and smooth mixture. via
How do you start a warm carbureted engine? (video)
Does fuel injection increase horsepower?
The technical answer is yes; fuel injectors can add 10 extra horsepower at peak. However, for some car owners, that minimal difference does not offset the increased cost and complexity of switching to fuel injectors or upgrading the existing stock fuel injectors. via