• Mon. Jun 27th, 2022


Just another WordPress site

530 Chain 120 Link


Jun 8, 2022

How long is a 120 link 530 chain?

Technical Details

Manufacturer ‎DID
Brand ‎DID
Model ‎530-120
Item Weight ‎4.45 pounds
Product Dimensions 11.1 x 4.5 x 1.1 inches


How many links are in a 530 chain?

530 Motorcycle Drive Chain - 120 Links with 2 Master Links. via

What is the difference between a 530 and 630 chain?

Generally, if you compare a 530 chain to an equivalent rated 630 chain, you will find that the heavier pins and rollers afforded by the longer pitch will result in a stronger chain construction, and higher tensile strength. via

How strong is a 530 chain?

Average Ultimate Strength: 6,620 LBS. via

What chain size is 530?

Metric Dimensions

Chain Pitch Width
428 12.70mm 7.75mm
520 15.88mm 6.35mm
525 15.88mm 7.85mm
530 15.88mm 9.53mm


Can you add links to a motorcycle chain?

You can safely add a link to a motorcycle chain. Master clip-on style links and river style links can be added to a motorcycle chain to add some length. As long as you are attaching the new link correctly, with the proper tools, you shouldn't have any problems. via

What's the difference between a 520 chain and a 530 chain?

turner38 Well-Known Member. A 530 chain on a 520 sprocket will work just fine, a 532 will not. The differance between a 520 and 530 is the width, the roller diamiter and pitch are the same. via

How are chains sized?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need. via

What do chain Size numbers mean?

A 4 means 4/8-inch; a 5 means 5/8-inch; a 6 means 6/8-inch. The meaning of the second number can vary. Most commonly, it designates the width of a chain (from the inside of one inner side plate to the other). Adding to the complication is roller diameter, which affects proper chain fitment too. via

How strong is a motorcycle chain?

Tensile Strength

The strongest motorcycle chains can carry loads as heavy as 8,000 pounds. Some chains come pre-stretched for better efficiency. via

What size is a 50 chain?

# 50 chain is an American standard size that is built to ANSI B29. 1 standards. This size is commonly referred to as 5/8" pitch roller chain, which comes from the pin to pin measurement. 50 chain is one of the most widely used chain sizes out of the 14 available ANSI standard chains. via

How wide is a 530 O ring chain?

Parts Unlimited 530 heavy duty O-Ring drive chain. This chain is 24.5mm wide (at it's widest point - the rivets) some vintage bikes can't use certain O-Ring chains if they are too wide. via

How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you'd add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm. via

What is the standard chain size?

Chain standards

Size Pitch Maximum roller diameter
50 0.625 in (15.88 mm) 0.400 in (10.16 mm)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm)


Is it OK to have 2 master links on a chain?

More than one master link should be fine. The only issue I can see with this practice is having a few links of unworn chain inserted into a worn one which might cause problems - not a problem in your specific case as the chain is almost brand new. via

How do I add extra links to my chain? (video)


How can I make my bike chain longer? (video)


Will a 520 chain fit a 520 sprocket?

520, 525, and 530 will all fit on a 520 sprocket, but a 530 sprocket will only fit a 530 chain. Except in emergencies, you should always match the chain size to the sprocket size. via

What size sprocket fits a 520 chain?

ZXTDR 520 20mm 13T Chain Front Sprocket Cog for 125cc-250cc Dirt Pit Bike ATV Go Kart (13T) via

What is the difference between 520 525 and 530 chains?

People will bring up the fact that 520 chains will wear out faster than 525/530 chains. Ultimately, if you start to nitpick, yes, they will. The tensile strength of the very top chains will be slightly higher (my EK520 chains' rating is 9400 where the top DID 530 is roughly 10400). via

Will a 530 chain fit a 525 sprocket?

Don't run a 530 chain on a 525 sprocket. You can get 530 sprockets if you want to go that route. via

How long does an O ring chain last?

If you ride hard, have a very powerful and torquey engine, and if you tend to neglect your maintenance, you can expect your chain to have a life of around 10,000 to 20,000 kilometers or even less, even if it is an O-ring or X-seal chain. via

How do I know my chain link size?

  • Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
  • Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you're seeing a good average size.
  • via

    How do I measure my neck chain?

    1 Wrap a soft tape measure around your neck, keeping the tape measure parallel to the floor as you measure. 2 Add 2 ~ 4" ( 5~10 cm) to your neck measurement to calculate to your minimum recommended chain length. This will prevent the chain from sitting too tightly around your neck. via

    How do I tell what grade my chain is?

    Just look for the “L” and then the number after it. Each number following the “L” corresponds with a grade of chain. On grade 70 this can also show that the chains are DOT approved! via

    Which company chain sprocket is best?

  • D.I.D. Street X-Ring Sprocket.
  • Renthal Twinring Rear Sprockets.
  • Supersprox Sprockets.
  • Sunstar Moto Steel Rear Sprocket.
  • Vortex Steel Rear Sprocket.
  • JT Sprockets Steel Front Sprocket.
  • RK Japan Takasago Chain & Sprocket Kits.
  • via

    What is an O-ring chain on a motorcycle?

    O-ring chains have rubber O-rings that sit between the inner and outer links, sealing in grease for inner chain components. The O-rings encircle the pin bushings, and rest between the outer link and inner link plates. This seals chain grease in the pins and rollers, maintaining better lubrication for longer. via

    Are DID chains any good?

    Go with the DID, you wont be disappointed. Very high quality and reliable. was not only a quality sprocket, it had some "bling" factor about it. However that price sounds pretty good to me and as i mentioned before DID is good stuff. via

    Which is the best motorcycle chain?

    The 4 Best Motorcycle Chains

  • ​1. RK Racing Chain 520-SO-120 120-Links O-Ring Chain with Connecting Link.
  • RK Racing Chain GB520XSO-120 120-Links Gold X-Ring Chain with Connecting Link.
  • DID 520ERT2 – 120 link Gold Chain with Connecting Link.
  • Renthal C294 R3-2 O-Ring 520-Pitch 120-Links Chain.
  • via

    Are chains faster than belts?

    Belt drives may cause the bottom bracket and rear hub to wear out faster- This happens because belts run at a much higher tension than chains. This extra tension puts more stress on the bearings in the bottom bracket and rear hub, causing them to wear out faster. via

    What is chain chart?

    Chain Diagrams. Chain diagrams, also called sequence of events diagrams, are a type of graphic organizer that describe the stages or steps in a process. via

    What size is #35 chain?

    #35 Chain Dimensions

    Size Pitch (P) Weight (Per Ft)
    35-2 0.375" 0.46 LBS
    35-3 0.375" 0.70 LBS
    35-4 0.375" 0.95 LBS


    How strong is 50 chain?

    #50 Heavy Duty Roller Chain

    Inner Plate Depth 0.594 Inch
    Plate Thickness 0.095 Inch
    Average Tensile Strength 6600 lb
    Material Carbon Steel
    Weight Per Foot 0.838 lbs


    How do you measure motorcycle chain width? (video)


    Leave a Reply

    Your email address will not be published.